Latest rear stop Tenders | Government rear stop Tenders

Central Government / Public Sector

CTN :44397745

17 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m.s.assorted scrap -98050047(15) cond.&u/s m s assorted scrap consisting of draw hook beams, secondary minor pads, brake shoes, curved pull rod, swing link pins, upper primary centering disc,lower /upper centring disc,axle boxcover, anti roll bar traction lever secondary centering disc z link axle guides, draft keys, brake gear pins, ms dash pots, protective tubes, roller bearings ms, outer rings, moulds,eq.stays, support device r/f carrier plates, silent bush supporting device f/r plate, hanger blocks, bss pins, lower spring seats, brake heads, diff. types of brake hangers and levers, d v components, ms collars,long bolts, dm rings, retaining rings, c.b.c components, base plate,supporting device, c.p.b bracket with control reservoir,m 16 bolts and cotters ,split pins, wearing plates, m s pipes, safety strap, bracket for bogie bolster, centre pivots, brake beam support brackets, safety wire rope pieces, rod pieces, bmbc barrels, and connecting rods,m s cartridges, cr rings, brake, lhb bearing components, collars, bolt & nuts,control reservoir & common pipe bracket components,backlash compensation device with elastomer pads, anti roll bars, brake controllers,oil pumps & filters,ms avm pads, shoe keys etc., with or without attachments of rubber, fiber, nylon bushes and other similar carriage and memu items . hsn code: 72044900 gst@18% on forward charge basis. note:1) delivery on actual weighment basis only. 2)if any ss/non-ferrous items found during loading /delivery shall be returned to the railways by the purchaser.3) segregation not permitted. location :ferrous yard bin no :- f-6.

Central Government/Public Sector

CTN :44397969

18 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - melting 98050114 %u2013 ms melting scrap: ms melting scrap released from assorted unserviceable rolling stock, track fittings, machinery, coach and locomotive components including pivot pin covers, pick axle, crow bar claw, released p-way keys, two way keys, dog spikes, rail clips, rail tensor, rail trolley parts, rail tongs, fish plates, joggle plates, heavy perforated ms plates, ms plates, iron plates, steel pattis, rail trolley wheels, channel sleeper fittings, damaged channel sleeper bridge pieces, t-head bolts for channel, bolts, screws, nut bolts, washers, clamps, securing bolts, cotter pins, knuckle pins, cbc supporting device parts, draft gear, draft key, draft yoke, draft hook, draw bar, draw hook beam, coupling links, coupling rods, shaku coupler parts, buffer spindle, spring loaded buffer assemblies, buffer and draw gear parts, centre pivot foundation box, centre housing, bogie bolster, bogie bolster hanger, hanger blocks, bolster suspension pins, laminated springs, support springs, leaf springs, lb springs, primary and lateral bump stops, emu rubber sandwich assemblies, brake rigging parts including brake heads, brake levers, brake cylinder assemblies, bmbc parts, brake pads, traction links, traction levers, traction motor pinion parts, traction motor gear case assemblies, gears, gear box, bearing cartridges, dismantled bearing spares with collars, phonic wheels, ctrb parts, equalising stay rods, anchor links, diagonal rods, gc bars, irs point machine slide parts, point electric detector parts, junction boxes for point machine, signal machine parts, locking slides with block, base plates, face plates, buffer plunger face plates, elbows, channels, guide t sections, parallel guide bars, sej brackets, z brackets, heavy brackets, stiffener plates, support brackets, reinforcement structures, mechanical linkages, cutter chain machine parts, pqrs machine parts, ttm machine components including hydraulic cylinders and hydraulic jacks, mechanical jacks, bottle jacks, piston rods, torque wrenches, spanners, lifting rollers, crane chains and hooks, loco chains, hook bolts, wire ropes, rope slings, pantograph cylinders, compressor cylinders and valves, westinghouse brake unit parts, condenser washers, nrv, dv, diesel generator set parts, metco traverser parts, bcm cotter chains, poh items of bg coaches, motor coach collars, icf collars, axle box front covers, centre pivot components, cattle guards, machine bases, platform cabin parts, mixed engine materials, hardware items, screw coupling parts, bearing end shields, dirt collectors and other miscellaneous ms melting items and railway ferrous scrap, materials broken, worn, bent or corroded and may contain small aluminium or other minor non-ferrous attachments with grease, oil, dirt and rust, all materials unserviceable and beyond economical repair ber, sold on as is where is basis, loading by purchaser, custodian: dms/scrap/pardi.

CTN :44318514

13 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr & bcnm1 wagons no as following: [1] er 10029661434 boxnm1 [2] ser 25079660153 boxnr [3] ser 10079663945 boxnm1 [4] nfr 10059560035 boxnm1 [5] er 10029501013 boxnm1 [6] cr 30019060856 bcnm1 [7] er 30029024589 bcnm1 [8] ser 10079662221 boxnr [9] special repair 10069760456 boxnm1 [10] cr 25019660502 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (103.560 mt) is the lot quantity (103.560 mt) as mentioned in the catalogue. [2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnm1, boxnr & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :44318515

13 Mar, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr & bcnm1 wagons no as following: [1] scr 10099563072 boxnm1 [2] ser 25079661846 boxnr [3] er 30029024138 bcnm1 [4] ser 10079767490 boxnm1 [5] ser 10079666038 boxnm1 [6] scr 25099760451 boxnr [7] cr 10019660515 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (80.120 mt) is the lot quantity (80.120 mt) as mentioned in the catalogue. [2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnm1, boxnr & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 & 02 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

Central Government/Public Sector

CTN :42645667

27 Mar, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of manufacturing and supply of forgings as per hal supplied technology and raw materials e e - link rod , link rod , cover , angle , lever , clip , t-joint , union , union , casing , angle , flange , angle bend , union , adapter , atomizer , flange , nozzle , supporting ring , bush , teejoint , lock washer , screw , bush , boss , angle bar , housing , casing , valve , beam , flange , flange , t-joint , clamp , block , sleeve , flap valve , valve plate , sphere , t-joint , sleeve , t-joint , lock washer , lock washer , block , link , t-joint , union , lock washer , safety washer , seal yoke , supporting ring , bush , casing of seal , housing , valve , shackle , lock washer , union , cross piece